For those of you with Damon's
Moderator: bbsadmin
For those of you with Damon's
Hello
My new braces were installed today and since coming to this board I have a curious question. I knew before going to my appointment that we would be doing Damon 3s.
After they were done and I got home I was surprised to find out just which Damon's he had installed and I was curious to see if anyone has the same "set up" as me. I am not having any troubles, I am only asking this as I am curious. Please excuse me if I do not explain this perfectly as I am new to this but I am hoping you can understand.
On my top 6 teeth I have Damon 3s (half clear half metal)
Then on the rest of my teeth both top and bottom are the Damon 3MXs.
I knew I would be getting the regular Damon 3s but I was surprised to find that I also have the MXs which are on most of my teeth. Does anyone else have this sort of combination?
Again I do not have a problem, I am just curious. There seems to be many combinations out there.
My new braces were installed today and since coming to this board I have a curious question. I knew before going to my appointment that we would be doing Damon 3s.
After they were done and I got home I was surprised to find out just which Damon's he had installed and I was curious to see if anyone has the same "set up" as me. I am not having any troubles, I am only asking this as I am curious. Please excuse me if I do not explain this perfectly as I am new to this but I am hoping you can understand.
On my top 6 teeth I have Damon 3s (half clear half metal)
Then on the rest of my teeth both top and bottom are the Damon 3MXs.
I knew I would be getting the regular Damon 3s but I was surprised to find that I also have the MXs which are on most of my teeth. Does anyone else have this sort of combination?
Again I do not have a problem, I am just curious. There seems to be many combinations out there.
-
- Posts: 199
- Joined: Mon Dec 11, 2006 11:30 am
- Location: England
- Contact:
I have plain Damon 3s on both my uppers and lowers, but I am aware of some people on this board having the same sort of combination as you. I love my damons; they're less noticeable than most other metal braces and have been doing a wonderful job so far.
Best of luck with your new braces.
Sim
Best of luck with your new braces.
Sim
Damon 3 braces for 22.5 months.
30th August 2005 - 13th July 2007
30th August 2005 - 13th July 2007
-
- Posts: 124
- Joined: Wed Jan 10, 2007 6:23 pm
- Location: Ontario, Canada
-
- Posts: 250
- Joined: Wed Nov 08, 2006 10:01 pm
- Location: Australia
Hi there. My ortho said that the clear bits on the damon 3s sometimes have a tendency to break away. So he prefers to use the much stronger 3mx where possible. I am guessing that's why your ortho chose the combination you have- 3s for the more visible teeth and 3mxs everywhere else. I have ceramics on my top 8 and conventionals/bands on my top molars, with 3mxs on the bottom.
Good luck with your journey!
Good luck with your journey!
Braced 20 Nov 06. Sentenced to 18-30 months. Released 23 Feb 09 (27 months and 3 days).
Uppers: 3M Clarity Ceramic. Lowers: Damon 3MX.
SARPE 21 April 06 and 7.5 months in expander (on for 2 weeks before surgery), turning to a width of 14.5mm.
Thank you everyone for your information. Its nice to know there are others out there with the same types of combinations and I can see now why they are in the combination they are. You are great help.
For those of you who said you don't know what the differences look like?
I searched the net for you to try and show you photos of the different brackets. I hope its ok to post them here.
Here is a Damon 2 Bracket
http://www.ormco.com/index/damon-thesys ... thebracket
Here is a Damon 3 Bracket
http://www.ormco.com/index/damon-thesys ... bracket-01
Here is a Damon 3mx Bracket
http://www.silomdental.com/damon3mx.html
Here is a model with the Damon 3s on top, (half ceramic and half metal) and ... Damon 3MXs on the bottom (full metal) http://www.damonbraces.com/images/inter ... podont.jpg
I have Damon 3 on six of my top-front teeth and Damon 3mx on all of the rest. I hope this helps.
For those of you who said you don't know what the differences look like?
I searched the net for you to try and show you photos of the different brackets. I hope its ok to post them here.
Here is a Damon 2 Bracket
http://www.ormco.com/index/damon-thesys ... thebracket
Here is a Damon 3 Bracket
http://www.ormco.com/index/damon-thesys ... bracket-01
Here is a Damon 3mx Bracket
http://www.silomdental.com/damon3mx.html
Here is a model with the Damon 3s on top, (half ceramic and half metal) and ... Damon 3MXs on the bottom (full metal) http://www.damonbraces.com/images/inter ... podont.jpg
I have Damon 3 on six of my top-front teeth and Damon 3mx on all of the rest. I hope this helps.
I've got the same setup - top six are the normal Damon 3's, the rest are Damon 3MXs. When I was first discussing it with my Dr, she said the top six would be clear - it wasn't until my records appt that I found out they were going to be Damons and so clear wasn't entirely clear. I'm not sure how less noticeable the Damon 3's are in regards to the 3MXs - it's obvious they are braces either way.
Good luck on your journey and welcome to the board,
JDub
Good luck on your journey and welcome to the board,
JDub
-
- Posts: 124
- Joined: Wed Jan 10, 2007 6:23 pm
- Location: Ontario, Canada
-
- Posts: 12
- Joined: Tue Dec 05, 2006 11:15 am
- Location: Washington DC
i have this combination too. so far, so good. NO pain, mild discomfort only during the first week. I am now in week 5. Go for my first adjustment on Feb. 14. I've actually been a little worried that if it doesn't hurt, it may not be working?? Also, my breath is not so fresh despite brushing morning and night and after each meal/snack. I am brushing 5 to 7 times a day!
-
- Posts: 12
- Joined: Tue Dec 05, 2006 11:15 am
- Location: Washington DC
KK, good points.
no, i am just brushing regularly and often and using Crest ProHealth rinse. I use Plax in the am. I don't have the other gadgets you mentioned. I tend to floss the front teeth but cant seem to get to the back ones.
do folks with damons also get the elastics? i thought damons didn't need them. Sorry for this off topic question but someone just asked me if needed to wear them.
no, i am just brushing regularly and often and using Crest ProHealth rinse. I use Plax in the am. I don't have the other gadgets you mentioned. I tend to floss the front teeth but cant seem to get to the back ones.
do folks with damons also get the elastics? i thought damons didn't need them. Sorry for this off topic question but someone just asked me if needed to wear them.
Meryaten's right. I'm in Damon 3s (and MXs - I know now thanks to your post). There are no ligs around the brackets, but I am having to wear elastics now, towards the end of my treatment. Elastics are rubber bands that usually go from top to bottom teeth in all sorts of painfully interesting configurations, depending on your teeth.
Damon 3s. On 2/15/2006. Off 2/21/2007!
Essix on uppers, Hawley on lowers.
Essix on uppers, Hawley on lowers.
<message deleted>
<message deleted>
Last edited by drh20s on Sun Feb 25, 2007 6:31 am, edited 1 time in total.
Your so lucky, my teeth are a bunch of whiners. It took two weeks for the pain level to subside enough to eat. I ended up eating pudding, yogurt and baby food for a while. (Just the fruits, noodles, thing like that).consideringbracesDC wrote:i have this combination too. so far, so good. NO pain, mild discomfort only during the first week. I am now in week 5. Go for my first adjustment on Feb. 14. I've actually been a little worried that if it doesn't hurt, it may not be working?? Also, my breath is not so fresh despite brushing morning and night and after each meal/snack. I am brushing 5 to 7 times a day!
Just touching any of my teeth was WOW painful. So chewing was out of the question. I think my teeth understand now that no amount of complaining is going to change anything. They are wearing their new Damon's whether they like it or not. Its nice to eat grown up food again.