I Have Invisalign But I Feel No Pain

Discussions about treatment with invisible braces that use clear aligners, such as Invisalign, OrthoClear, the Red White and Blue system, etc.

Moderator: bbsadmin

Post Reply
Message
Author
depierce
Posts: 2
Joined: Wed Aug 08, 2007 10:14 pm

I Have Invisalign But I Feel No Pain

#1 Post by depierce »

I'm currently on my second set of Invisalign and I have yet to feel any pain. I have minor gaps that need to be corrected. I read on the internet and my dentist told me that there will be some pressure and discomfort at first but I abosuletly feel no pain. && They Are A Snug Fit. Does anybody else feel like this and is my treatment going to work?

eggraid101
Posts: 86
Joined: Mon Aug 06, 2007 11:39 am
Location: Leesburg, VA

#2 Post by eggraid101 »

I wouldn't worry too much about it. Everyone is different in terms of how much pain they feel, even in doing a similar type of movement. Just consider yourself one of the lucky ones! It often takes awhile to 'see' much change with invisalign, unlike with braces - don't be discouraged. Resist the urge to move ahead of schedule with the next aligner just because you don't feel pain, this is a recipe for disaster.
Russell Mullen, DDS MS
Leesburg, VA

Remember: your orthodontist knows your dental history and orthodontic condition best. I can guide you toward better orthodontic information than if you were left on your own and hopefully in doing so play a small part in your quest to achieve a beautiful, fully functional smile, but you should consider your orthodontist the best source of information.

http://www.mullenortho.com

diehard
Posts: 352
Joined: Thu Nov 10, 2005 9:48 am
Location: uk

#3 Post by diehard »

its russian roulette with trays sometimes they hurt and sometimes they don`t :)

Lilypad
Posts: 198
Joined: Fri Jul 27, 2007 8:03 am

#4 Post by Lilypad »

Hello! I'm on day 8 of 2/12 to close a 4.5 mm gap in my 2 front teeth and to close a small overbite. I havent had anything which i would call pain yet. On the first couple of days of a new tray i do feel some pressure, but havent felt the need to take any painkillers at all. The 2 attachments i got on the 2nd tray do increase the difficulty of removing them. I would imagine the more difficult the case, the more pain people have. Ive wanted this for so long, (im 46) i doubt my attitude of joy will LET me feel any pain! :jump:

depierce
Posts: 2
Joined: Wed Aug 08, 2007 10:14 pm

#5 Post by depierce »

That's what I thought too. Maybe I'm looking forward to it so much I just don't feel any pain. THanks everybody for your replies!

jeni
Posts: 96
Joined: Mon Oct 09, 2006 7:07 am
Location: Indiana

#6 Post by jeni »

It is also worth noting that, for me at least, that the level of pain or pressure (normally it is just pressure) varies with each aligner. I am on #12 and so far there have only been 1 or 2 aligners for each the bottom or the top that have applied a lot of pressure, 1 of which was so unbearable that it was still uncomfortable a couple of days later. I just put a new one in last night and it is one of the least uncomfortable in terms of pressure that I have had. I think that some teeth are just more sensitive to the pressure and it must be that none of those teeth are moving on this set.

PIMPmyTEETH
Posts: 102
Joined: Thu Oct 19, 2006 2:37 pm

#7 Post by PIMPmyTEETH »

i usually only feel some pain when i take them out to eat the first day or two. other than that, it just feels like a little pressure. that goes away pretty quck. i sometimes get a headache the first day of a new tray, though.
invisalign patient since feb 2007
upper trays: 25.
lower trays: 11+5 refinements.
now: bonded wires+upper essix.

dale
Posts: 11
Joined: Wed Feb 21, 2007 11:47 pm

#8 Post by dale »

I normally feel discomfort or dull pressure for the first day or two after changing aligners - but only when I am taking them out or putting them back in. Sometimes I can even tell which particular teeth are making the most movement with the changed tray. There have been times when my ortho has adjusted the aligners to make them tighter (using a tool that looks like a hole puncher to make lots of little indentations on the trays). There is significantly more pressure them. Consider yourself lucky!

Post Reply