Hi Guys,
I'm back with an update. If you have been reading my story and my posts on the forum you will know that movement has been very slow in the last months. Well, there is a good reason for this.
Status right now is that my lowers are finished but gaps between upper canines and premolars still need to close. The problem is that horizontal movement i.e. pulling back the upper front teeth at this point is no longer possible due to the lack of space between lower and upper front teeth. The way to deal with this is to pull the upper teeth up thereby creating space between lower and upper front teeth and then pull the front teeth back with a view to close upper teeth extraction gaps. This might sound a bit confusing, so I made a little graphic below:

So as the front teeth pull upwards the space between lower and upper incisors will open up and enable the pulling back of the upper teeth.
My ortho attached plastic bite turbos on the inside of the 2 upper incisors in order to facilitate the upward movement of the upper front teeth. I felt kind of weird in the beginning with these plastic things reminding me of the beginning of the treatment where I was unable to bite down correctly. Furthermore the bite turbos made me lisp slightly reminding me of the good old TPA days... Aaaarrrggghhhh

No wires were changed. Only the power chain on the upper teeth with an extra piece of power chain between canines and premolars which appears to be my problem spot.
I asked my ortho if I was still due to debonding before Summer and he confirmed this again. I know that I shouldn't be asking about this since it's only an educated guess and since I will be SO disappointed if debonding is delayed further in say end of Summer in stead. But I need to have this hope....

pics as usual:
front:

sides:


upper:


Next adjustment is 24 March 2009. I hope that the bite turbos do their magic!!

I'll be back...
